Produkte suchen
Moto Folie anbringen EN

MANUAL FOIL

Take your time and watch our VIDEO.

Be sure to apply the SE FOLIE in the evening – this will allow it to dry overnight and develop its full adhesion.

smart-engineered.com/manual

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

HERE YOU CAN FIND ALL STEPS SHOWN IN THE VIDEO AGAIN

1. CLEAN AND DUST FREE

First you need a clean and windless working environment. Familiarise yourself with the DELIVERY CONTENT and wash your hands.

Now you need to clean the display (CLEANING CLOTH) and then clean it dust-free (MICROFIBRE CLOTH). You can easily collect stubborn dust particles with the DUST REMOVER.

2. MOISTEN FINGERTIPS

Shake the SPRAY with the application liquid well and spray your fingertips. This prevents you from leaving fingerprints on the adhesive surface when you peel off the SE FOLIE.

3. REMOVE & MOISTEN THE SE FOLIE

Now peel the SE FOLIE off the backliner and place it in your hand with the adhesive side facing up.

Spray a fine mist onto the adhesive side of the film and then position it on the display. Now the protective film can be perfectly aligned and corrected. If the protective film does not move on the display, simply peel it off and spray again.

4. WIPE OUT MOISTURE

Take the SQUEEGEE and place it in the MICROFIBRE CLOTH. Using the edge, gently wipe the liquid from the centre of the display outwards to the edge.

Use your thumb to wipe out the remaining liquid on the edge of the display. The edge may not yet stick because the liquid is still preventing it (this may be the case with rounded or curved displays).

  • Small bubbles and moisture residues may remain at first, this is completely normal.

5. PRESS ON THE EDGES (OPTIONAL)

Only if you have a rounded or curved display model and the edges do not yet adhere:

Wait ten minutes and let the SE FOLIE dry. Then press the edges to the screen again until the protective film adheres firmly.

The process can be shortened carefully with the help of a hair dryer:

    1. 1. smallest setting with sufficient distance
    2. 2. short application interval (5-10 seconds))
    3. 3. repeat if necessary

  • Any bubbles that are still visible will disappear completely within 1-3 days.
Dein Warenkorb